specifications are subject to change without notice. customers should verify actual device performance in their specific applications. trimpot potentiometer panel mounting options and hardware many trimpot potentiometers are available for panel mount application. this product option provides for maximum design flexibility. to order trimpot potentiometers with panel mount hardware attached by the factory, simply add an ??or ?? suffix to the bourns part number per table i. example: 3006p-1-100z to order military trimpot potentiometers with panel mount hardware attached by the factory, order the military part number and add ?ith panel mount attached. example: rt12c2prc, with panel mount attached. to order panel mounting accessories for customer installation, simply use the part number per table ii. example: h83p note: for complete product specifica- tions, see data sheet for the trimmer model. torque - apply maximum 8 in. lbs. on mounting nut when mounted on panel. 6.76 .38 (.266 .015) hex nut and lockwasher 10.31 (.406) 7.95 (.313) 33.35 (1.31) 6.35 (.25) 1.52 to 3.30 (.06 to .13) bushing 10-32 nf-2 thd 5.94 (.234) adj. slot 2.54 (.100) .635 (.020) .762 (.030) max. long wide deep models 3005/3006/3009 3.81 (.150) 20.32 (.80) 6.35 (.25) #10-32 unf-2a thd. 2.54 (.100) 7.92 (.312) panel max. 3.30 (0.13) adj. slot 2.54 (.100 ) .508 (.020) .762 (.030) long wide deep models rt12/rj12, 3057/3059 factory installed panel mount notes: 1. provided with lockwasher and mounting nut. 2. recommend panel holes. #10 drill .194 (.008) notes: 1. provided with lockwasher and mounting nut. 2. recommend panel hole size #7 drill .200 (.008)
specifications are subject to change without notice. customers should verify actual device performance in their specific applications. 6.10 (.240) 3.05 (.120) bushing 10-32 unf-2a thd. opt. bend down anti- rotation tab 6.35 (.250) 10.92 (.430) .826 .038 (.033 .020) 11.68 (.460) panel 3.3 (.130) max 7.37 (.290) optional for anti-rotation nub = 7 drill panel layout notes: provided with lockwasher and mounting nut 7.62 (.300) 4.06 (.160) bushing 10-32 unf-2a thd. opt. bend down anti- rotation tab 13.97 (.550) 11.43 (.450) 14.99 (.590) 10.16 (.400) panel layout 6.10 (.240) 3.05 (.120) bushing 10-32 unf-2a thd. opt. bend down anti- rotation tab 11.43 (.450) .826 .038 (.033 .020) 11.68 (.460) panel layout notes: 1 provided with lockwasher and mounting nut adj. slot .243 (.010) .064 (.003) .064 (.003) long wide deep .200 (.008) .132 (.005) optional for anti-rotation nub = 7 drill .200 (.008) .132 (.005) optional for anti-rotation nub = 7 drill .200 (.008) .132 (.005) 7.37 (.290) 6.35 (.250) panel 3.3 (.130) max 6.35 (.250) panel 3.3 (.130) max adj. slot .243 (.010) .064 (.003) .064 (.003) long wide deep adj. slot .243 (.010) .064 (.003) .064 (.003) long wide deep models rt22/rtr22/rj22 3250/3252 models rt24/rtr24/3290 h and w styles - 3290 x & w styles- rt24/rtr24 models 3292 x, l and w styles factory installed panel mount notes: 1. provided with lockwasher and mounting nut. notes: 1. provided with lockwasher and mounting nut. notes: 1. provided with lockwasher and mounting nut.
specifications are subject to change without notice. customers should verify actual device performance in their specific applications. h-65p panel mount 1/2 inch square multiturn models h-83p panel mount adapter for models 3005 and 3006 the h-83p adapter is used with models 3005 and 3006. order separately and simply snap fit the trimmer in the plastic case. the h-83p with lock-washer and mounting nut is available in 50-piece lots. h-58p panel mount 1-1/4 inch rectangular multiturn modules 10.0 (.394) hex nut and lockwasher 10.31 (.406) max. 7.95 (.313) 33.35 (1.31) 6.35 (.250) to bushing 10-32 nf-2 thd 5.94 (.234) 7.62 (.300) 4.06 (.160) bushing 10-32 unf-2a thd. opt. bend down anti- rotation tab 6.35 (.250) 13.97 (.550) 11.43 (.450) 14.99 (.590) 10.16 (.400) panel layout 22.10 (.870) 7.62 (.300) 5/16-32 unef thread 5.54 (.218) 9.53 (.375) 9.53 (.375) adj. shaft recessed 5/16 adj. slot .243 (.010) .064 (.003) .064 (.003) long wide deep 1.52 (.060) 3.30 (.130) panel max. 3.30 (0.13) adj. slot 2.54 (.100) .635 (.250) .762 (.030 ) long wide deep = 7 drill .200 (.008) optional for anti-rotation nub .132 (.005) see table ii for panel mount part number customer installed panel mount - unsealed notes: 1. provided with lockwasher and mounting nut. 2. recommend panel holes. #10 drill .194 (.008) notes: 1. provided with lockwasher and mounting nut. 2. drawings shown with trimmer. order part separately notes: 1. drawings shown with trimmer. order part separately *specify h82 if panel seal is required.
h-114p/115p/116p panel mount 3/8 inch square multiturn models notes: 1. provided with lockwasher and mounting nut. 2. drawings shown with trimmer. order part separately. h-117p panel mount 3/8 inch square multiturn models notes: 1. provided with lockwasher and mounting nut. 2. drawings shown with trimmer. order part separately. speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications customer installed panel mount 6.10 (.240) 3.05 (.120) bushing 10-32 unf-2a thd. opt. bend down anti- rotation tab 6.35 (.250) 10.92 (.430) (h-114p) 11.68 (.460) 7.37 (.290) panel layout 11.43 (.450) (h-115p) (h-116p) adj. slot .243 (.010) .064 (.003) .064 (.003) long wide deep 8.179 (.322) (h-115p) (h-116p) 8.255 (.325) (h-114p) panel max. 3.30 (0.13) = 7 drill 5.08 (.200) optional for anti-rotation nub .132 (.005) 6.86 (.270) 4.06 (.160) bushing 10-32 unf-2a thd. 6.10 (.240) 8.76 .38 (.345 .015) 11.68 (.460) 7.62 (.300) panel layout 11.68 (.460) adj. slot 2.44 (.096) .635 (.025) .635 (.025) dia. wide deep 2.54 (.100) ref. 2.54 (.100) ref. 5.72 (.225) ref. dia. 5.08 (.200) optional for anti-rotation lug 1.32 (.052) table i factory installed panel mounts p/n with standard p/n panel mount 3005p-1-(rc) 3005p-1-(rc) z 3006p,y, or w-1-(rc) 3006p,y, or w-1-(rc) z 3009p or y-1-(rc) 3009p or y-1-(rc) z 3057l,j,p, or y-1-(rc) 3057l,j,p, or y-1-(rc) m 3059l,j,p, or y-1-(rc) 3059l,j,p, or y-1-(rc) m 3250l or w-1-(rc) 3250l or w-1-(rc) m 3252l or w-1-(rc) 3252l or w-1-(rc) m 3290 h or w-1-(rc) 3290h or w-1-(rc) m 3292l,w, or x-1-(rc) 3292l,w, or x-1-(rc) m 3296w or x-1-(rc) 3296w or x-1-(rc) m table ii retro-fit panel mounts for installation by customer order panel mount standard p/n p/n 3005p-1-(rc) h-83p 3006p,y, or w-1-(rc) h-83p 3057l,j,p, or y-1-(rc) h-58p* screw assy. 3059l,j,p, or y-1-(rc) h-58p* screw assy. 3250l, w, x-(rc) h-65p-1* 3252l or w-1-(rc) h-65p-3* 3252x-1-(rc) h-65p-5* 3290 h or w-1-(rc) h-114p* 3292l-1-(rc) h-115p* 3292w or x-1-(rc) h-116p* rt12p,y,l h-58p* screw assy. rj12p,y h-58p* screw assy. rt22l,w, x, rtr22l,w, x h-65p-1* rj22l,w h-65p-3* rj22x h-65p-5* rt24w / rtr24w or x h-114p* rjr24w or x h-117p* *specify h-82 if panel seal is required.
specifications are subject to change without notice. customers should verify actual device performance in their specific applications. .236 (.093) .363 (.143) 1.321 (.520) .178 (.070) 1.064 (.419) .51 (.02) h-25/h-28 stacking straps models 3250, 3252 (h-25) and 3292 (h-28). h-26s side bracket models 3250 and 3252 this hardware is available for special mounting applications. h-82 panel seal for all panel mounts with size 10-32 bushings. 7.37 (.290) 3.81 (.150) 4.83 (.190) .381 (.015) 1.02 (.040) stainless steel cup washer .89 (.035) rubber o ring b c a 9.35 (.368) 9.35 (.368) 4.57 (.180) 12.70 (.500) 23.62 (.930) 4 plcs. 13.21 (.520) 4.01 (.158) 6.35 (.250) 6.35 (.250) .325 (.013) dia. 2 plcs. 6.35 (.250) 15.88 (.625) 4.83 (.190) typ. dimensions h-25 h-28 a b c thickness .318 (.125) to be used with the following to provide panel seal: h-58p h-65p-1 h-65p-3 h-65p-5 h-114p h-115p h-116p h-117p hardware for special mounting applications
|
